| This 3650 sized motor has the same outside appearance as a brushed 540 class motor, so its size is suitable for all 1/10 chassis. It is mostly used for 1/10 and 1/12 scale ON ROAD and OFF-ROAD car. 1 Specification
Model
| KV
| Diameter
mm | Length
mm (Without Shaft) | Shaft
mm | Shaft Length
mm | Weight
g |
| 6000 | 36.0 | 50 | 3.17 | 15 | 165 |
| 4000 | 36.0 | 50 | 3.17 | 15 | 165 |
| 3300 | 36.0 | 50 | 3.17 | 15 | 165 |
| 2400 | 36.0 | 50 | 3.17 | 15 | 165 |
|
|
|
|
|
|
|
2 View of The Motor
3 Features
3.1 Top quality materials:
 Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
3.2 Dustproof design.
3.3 Big output power.
Specifications:
- Output: A- Suitable for the motor, 540S(36*50), less than 5000KV(1/10 on road electric car)
- B-Suitable for the motor, 540S (36*50), less than 4000KV(1/10 on road electric buggy)
- C-Suitable for the motor, 540S (36*50), less than 3500KV(1/10 on road electric truck)
- FET: TO252, three in parallel connection, 225A( each 75A in 25C), 150A(each 50A in 100C) this data is for reference under best condition.
- BEC:5V 1A
- Temperature Protection: cutoff when temperature over 98(+/-3-5 centigrade)
- Max Output: 540W/60sec
- Dimension:45mm*55mm825mm, 90g
EZRun Series Senor less Brushless Electronic Speed Control ESC + Brushless 12T 3650S 3300 KV Motor & Program Card w/ 10 Programmable Modes Uprade Combo Kit
Specifications :
| Throttle Mode | Forward/Brake/Reverse (programmable) |
| Constant Current | 35A |
| Burst Current | 190A |
| Resistance | 0.0015 ohm |
| Case Size | 31.5mm x 28mm x 34mm (with cooling fan) |
| Weight | 30g (excluding power wires) |
| Motor Limit | Over 8.5 Turns (6 cells) |
| Power Wires | 14AWG Silicone Wires |
| Voltage Input | 4-9 cells NiMH, 2-3 cells Li-Po (4.8-11.1V) |
| Programmable | 10 Programmable Modes |
| Alum Heat sink | Alum Heat sink with 25mm Cooling Fan |
| Sensor less | Yes |
10 programmable modes program card.
Throttle modes (Forward/Brake or Forward/Brake/Reverse)
Drag brake
Low voltage cut-off protection
Start mode (punch)
Maximum brake force
Maximum reverse force
Initial brake
Neutral Range (dead band)
Motor Timing
Over-heat protection |
Upgrade Kits Included:
35A-SL-V1.1 EZRun Series Sensor less Brushless Speed Controller w/ Reverse Programmable
Brushless Motor 12T 3650S KV 3300
Program Card w/ 10 programmable modes
58 Teeth 48 Pitch Spur Gear for Brushed 1/10
58 Teeth 48 Pitch Spur Gear for Brushed 1/10 * Designed for 51C801 Brush Version 1/10 EP On-Road Car
 48 Teeth 32 Pitch Spur Gear for 1/10 Brushless Cars
48 Teeth 32 Pitch Spur Gear for 1/10 Brushless Cars
Designed for the following models
- 51C801-Pro 1/10 EP Brushless On-Road Cars
- 51C802-Pro 1/10 EP Brushless Buggy
- 51C803-Pro 1/10 EP Brushless Truck
- 51C806-Pro 1/10 EP Brushless Drift Car
- 51C809-Pro 1/10 EP Brushless Rally Car
26 Teeth 48 Pitch Pinion Gear for Brushed 1/1026 Teeth 48 Pitch Pinion Gear for Brushed 1/10 - Designed for 51C801 Brush Version 1/10 EP On-Road Car
29 Teeth 48 Pitch Pinion Gear (Steel) for 1/10 Brushless
29 Teeth 48 Pitch Pinion Gear (Steel) for 1/10 Brushless - Designed for 51C801-PRO 1/10 EP Brushless On-Road Cars
ALL INFOMATION FROM www.nitro rcx.com |
Tiada ulasan:
Catat Ulasan