klik2 cuci mata

Selasa, 3 September 2013

ADJUSTABLE HEIGHT SHOCK SET (E10/2pcs)

E10/High Precision Adjustable Shock Set

 




 


Bolt a set of Adjustable Height Shocks to your E10 for increased suspension performance and dramatically decreased lap times! These are real threaded shocks for fast ride height adjustments, just like real race cars! Not only do they perform on the street, they look fantastic, too. These are made to exact HPI factory specifications for a perfect “bolt-in” fit. Sold in pairs, so you'll need two pairs to fully outfit your E10.

Info from www.hpiracing.com

HPI/HB HAULER BAG (5 DRAWERS/BLACK)

60*37*60CM HAULER BAG WITH WHELLS & RETRACTABLE HANDLE

 






 

 

Arrive at the track in style with the fabulous HPI/HB Hauler Bag! This official HPI/HB accessory is roomy enough for a 1/8 scale buggy or touring/drift car and all required accessories, it's sturdy enough to withstand the rigors of international travel, and with the HPI/HB ‘hex' logos emblazoned prominently across it, looks great too! Using high-impact, corrugated black plastic sheets to form the interior of the HPI/HB Hauler Bag means that it's light and manoeuvrable, so it's easy to get where you need to be. The bag features inline skate-type wheels and an extending carry handle so it's easy to transport through crowded airports or even just across the parking lot and into your favourite RC track. The lightweight aluminium handle extends to two lengths and is secured in place with a sturdy push-button release, and tough carry handles at each end and a long shoulder strap give you more carrying options. The outer fabric is a tough-wearing nylon weave and the zipper closures feature self-repairing teeth so it's easy to shut, even when packed to nearly bursting. The zippered top shelf has loop-style tool holders or can easily fit a tool organizer. There's plenty of extra space for large tools, a big pit towel and plenty more! The selection of side pockets includes a huge side pocket that can hold an extra-large setup board, an end pocket for instruction manuals or magazines, and two pockets on the opposite end that can hold cleaning spray cans and diff or shock oils. The main body of the HPI/HB Hauler Bag features a full-side zippered opening that rolls up and is secured with hook-and-loop fasteners to stay out of the way of the drawers. The 5 corrugated plastic drawers help you organize your tires, spares, battery packs, charger, extra tool, radio and vehicle. Three sizes of drawers are included, allowing you to set up the hauler bag so it's just right for you. You can also customize the drawers with the #107248 Drawer Set to have an extra set of drawers ready to go for nitro, electric, off-road, on-road or any other type of racing! Swap out the drawers in your HPI/HB Hauler Bag for each race weekend and bring only what you need! The HPI/HB Hauler Bag requires some assembly, full instructions are included.


Info from www.hpiracing.com

FEMALE GOLD CONNECTORS (5 PAIRS) (4.0MM)

FEMALE GOLD CONNECTORS (5 PAIRS) (4.0MM)



 

Quickly and easily connect batteries and speedos using different connectors with our series of highest quality gold-plated connectors! These connectors are ideal for use in high-current, high-power applications such as with the Flux Warp motors. These are also suitable for high-current batteries. Supplied in packs of three for use with brushless speedos, or as replacement connectors for the Flux Motiv brushless speedo system. HPI 4mm and 6mm bullet connectors allow you to attach 12 gauge and 10 gauge wire to your high-voltage motors, batteries and speedos with no power loss. The pure gold plating does not corrode and enhances the connection quality, ensuring you get the maximum amount of power. #101950 Male Gold Plated Connector (1 Pr) (4.0mm) #101951 Female Gold Connectors (5 Pairs) (4.0mm) #101952 Male Gold Connectors (6.0mm dia) (3 Pcs) #101953 Female Gold Connectors (6.0mm dia) (3 Pcs) #101961 4mm Male Banana Plug to Tamiya Female Adapter Lead

FEMALE GOLD CONNECTORS (6.0MM DIA) (3 PCS)


 

Quickly and easily connect batteries and speedos using different connectors with our series of highest quality gold-plated connectors! These connectors are ideal for use in high-current, high-power applications such as with the Flux Tork 2200 or Tork 2600 motors. These are also suitable for high-current batteries. Supplied in packs of three for use with brushless speedos, or as replacement connectors for the Flux Blur brushless speedo system. HPI 4mm and 6mm bullet connectors allow you to attach 12 gauge and 10 gauge wire to your high-voltage motors, batteries and speedos with no power loss. The pure gold plating does not corrode and enhances the connection quality, ensuring you get the maximum amount of power. #101950 Male Gold Plated Connector (1 Pr) (4.0mm) #101951 Female Gold Connectors (5 Pairs) (4.0mm) #101952 Male Gold Connectors (6.0mm dia) (3 Pcs) #101953 Female Gold Connectors (6.0mm dia) (3 Pcs) #101961 4mm Male Banana Plug to Tamiya Female Adapter Lead

MALE AND FEMALE GOLD CONNECTOR(4.0MM)

 


 

Quickly and easily connect batteries and speedos using different connectors with our series of highest quality gold-plated connectors! These connectors are ideal for use in high-current, high-power applications such as with the Flux Warp motors. These are also suitable for high-current batteries. Supplied in packs of three for use with brushless speedos, or as replacement connectors for the Flux Motiv brushless speedo system. HPI 4mm and 6mm bullet connectors allow you to attach 12 gauge and 10 gauge wire to your high-voltage motors, batteries and speedos with no power loss. The pure gold plating does not corrode and enhances the connection quality, ensuring you get the maximum amount of power. #101950 Male Gold Plated Connector (1 Pr) (4.0mm) #101951 Female Gold Connectors (5 Pairs) (4.0mm) #101952 Male Gold Connectors (6.0mm dia) (3 Pcs) #101953 Female Gold Connectors (6.0mm dia) (3 Pcs) #101961 4mm Male Banana Plug to Tamiya Female Adapter Lead


Info from www.hpiracing.com

1978 PONTIAC FIREBIRD BODY (200mm)

1/10Touring Car Size 200mm/Use offset wheels for 190mm width chassis General Motors Trademarks used under license to HPI.










One of the original muscle cars, the Pontiac Firebird had a long and storied history, with its popularity peaking in the late 70's after the release of a certain Hollywood movie featuring the original of this car, the hugely successful black ‘Bandit' version with gold detail, flared air dams and that famous ‘shaker' hood!
Originally released as a 1967 model and sharing the Chevrolet Camaro chassis, the Pontiac Firebird used various engines from different General Motors divisions to keep its reputation as one of the original ‘pony cars'. In the 1978 model year, you could choose a base V6 or one of 5 different V8 engines making up to 200 horsepower. To help celebrate the 50th anniversary of Pontiac, the Special Edition was offered to the public in 1976, using black paint with gold accents, add-on lower body panels and more. The popularity of the gold-on-black Special Edition was immeasurably boosted by its starring role in the smash hit movie ‘Smokey and the Bandit', and the car would forever be known unofficially as the ‘Bandit' edition! Our replica of this iconic Hollywood motoring legend takes all the familiar shapes and lines and shrinks them down to 1/10th scale to fit on your RC touring car chassis! A huge vinyl pre-cut decal sheet comes with all of the good stuff: official Pontiac & Special Edition logos and even the gold firebird and pin-striping that made the ‘Bandit' edition one of the most highly coveted cars of the 70's! Like all HPI bodies, the '78 Firebird comes with a clear protective overspray film, window masks and a large pre-cut decal sheet. The body also has drill locations marked for HPI touring car chassis, making it easy to line up the body mount and antenna holes.
  • Premium vinyl decals include window frames, headlights, grill, tail lights, official logos and more - for a perfect finish with a lot of details
  • High quality, crystal clear polycarbonate with excellent dimensional stability and impact resistance, for extra strength and longer life
  • Clear, easy-peel overspray paint film makes painting quick and easy
  • Pre-marked body post holes for easy mounting on HPI cars
  • Officially licensed body
Get ‘Eastbound and down' with this replica of the famous 1976 Pontiac Firebird Trans Am!



Info from www.hpiracing.com

Rabu, 10 April 2013

1/7 RC Gas Powered 2WD Racing Buggy SCORPION XXL
SCORPION XXL 



Menacing looks and performance to match!
Looks BAD, runs good! Easy to run, tough on the competition!
With a chassis and power source combination that delivers a sharp control feel, the concept of large-scale off-roaders has been altered forever with the introduction of the Scorpion XXL VE 2WD racing buggy. This high-performance racing weapon dominates land and air with the power to charge over big jumps through off-road racing circuits and rough terrain. Now a powerful GP model joins the Scorpion XXL series that stormed across the world with its sharp control feel around the suspension and chassis layout with centralized weight featuring a midship mounted XXL engine fitted with pull starter. The unique design effectively maintains rear traction while reducing the under steer characteristic of 2WD vehicles. The full benefits of the engine power source are captured while the suspension is even more flexible than the VE model to deliver a unique finish despite the number of components shared across both chassis platforms. A waterproof RC system including the KS203 servo incorporating metal gears delivers a sharp response with (4 x AA) alkaline batteries through the KR200 receiver with failsafe function and the 2.4GHz KT201 transmitter featuring an LCD display for precision setting adjustments. With the XXL engine mentioned above included, high torque delivers dynamic big scale car performance while the long manifold and large silencer generate additional power output. A large 210cc fuel tank delivers run times of more than 12 minutes while the fuel tank cap is styled as an air intake to add even more character to the model. The easy-start engine is also simple to switch off with the newly developed cutoff switch. These enhancements are designed to make owning and running a GP engine model simpler and easier than ever before. The throbbing sound of engine power and exhaust build performance expectations that this big scale buggy can meet and exceed as you experience off-road racing like never before!



Large 3D shaped air intake on the side of the body channels a fresh air stream into the chassis for extra engine cooling. ※Black is a color image overseas.
 


Features cutoff switch that stops engine easily. Combines with easy-start engine to make it easier for first-time users of GP models.


Features a 3-piece clutch that delivers reliable performance, even under the heavy loads of a big scale model and the powerful torque of the engine.


Large slipper clutch installed. Protects drive train from the excessive shock. Minimizes wheel spin.


Front knuckle with small scrub setting eliminates the slow steering feel typical of large-scale models.
 

Features air-intake styled fuel cap.


Realistic rear exhaust enhances power and keeps your whip CLEAN.


The 2.4 GHz KT201 transmitter provides precision control and displays the settings for each function on the LCD screen such as EPA and ABS brakes. The KR200 receiver features a fail-safe setting, and a high torque KS203 servo with an aluminum case and metal gears is also included in the factory-assembled Scorpion XXL VE. Only batteries for the transmitter and 2 to 4S LiPo batteries are required to experience the powerful performance and pure excitement of big-scale off-road buggy racing.


High response & torque waterproof servo delivers next-level performance for a factory-built machine.




  • Features hex type screws for secure assembly and sharp looks too.
  • The molded front and rear shock towers feature ultra rigid construction for precision performance, while allowing just enough flex to maximize durability.
  • Molded roll bar and roof can be installed with dummy fog lamps. Roll bar is already pre-installed on the Readyset.
  • Includes a wing mount that allows installation of the rear wing from the Inferno MP9 (optional). Slight modification to wing is required. 

ALL INFOMATION FROM WWW.KYOSHO.COM

Rabu, 6 Mac 2013


Discount Tire/Falken Tire Nissan S13 Drifting Excitement!

LIMITED EU EDITION


HPI Racing is proud to announce the new, officially licensed, Discount Tire/Falken Tire Nissan S13. Dai Yoshihara's 2012 sideways sliding Nissan S13 has also been scaled to down a perfect 1/10-scale version to provide drifting fans with the most excitement and realism out there! Discount Tire / Falken Tire's trademark livery has been perfectly replicated onto the E10 Drift, as have the officially licensed Falken Azenis RT-615K drift tires. The Discount Tire/Falken Tire Nissan S13 E10 Drift is also equipped with an HPI 2.4GHz radio, and also includes a Plazma battery pack, Plazma AA's, and an AC wall charger for instant drifting excitement!







2.4GHz Equipped

The new Discount Tire/Falken Tire Nissan S13 is equipped with a high quality HPI 2.4GHz radio system. 2.4GHz technology provides you with the best possible vehicle operation and control, without the need of crystals, just turn on your radio and drive. Drifting in large groups is possible without running into any frequency conflicts.



Bonus Accessories
Also included are all of the accessories necessary to get you up and drifting in no time! A rechargeable 7.2V Plazma battery pack, Plazma AA batteries for the transmitter, and even an AC wall charger are all included to help get you sideways as soon as you open the box.



Ready-To-Run Electric Drift Machine!
The RTR E10 Drift from HPI Racing is an entry level 1/10th scale electric drift car designed for fun driving with realistic looks and performance, all at a low price. The E10 was designed so anyone can take the wheel and give drifting a try! Arriving right out of the box in ready-to-run (RTR) form with a fully painted body and a preassembled chassis, it's a simple matter of 'charge and go' for hours of fun. 

The E10 uses true full-time 4WD and independent suspension and specially designed Falken Azenis RT-615K drift tires, making it easy to drift on paved parking lot surfaces. The hard T-Drift tires make drifting easy, holding a smooth line and maximum drift angle just like full size drift cars. An enclosed drivetrain keeps dirt and dust out of the gears for low maintenance and reliability. A large foam bumper protects the car from crash damage, and the chassis and suspension have been strategically engineered for entry level performance and durability. 

The RTR E10 includes a high-performance SC-15WP electronic speed control that has throttle, brakes and reverse, allowing it to drive and maneuver just like real cars. Providing the horsepower is a powerful Saturn 27T electric motor for reliable power and performance with low maintenance. 

The E10 uses standard body mounting points so owners can fit a wide variety of HPI Racing bodies to customize the look of their car. Most popular wheel and tires bolt right on for extra tuning and styling options. It's super-easy to choose from an extensive range of touring car, muscle car and drift car accessories to customize the E10! 

For extra excitement, the E10 is designed so that it can be easily converted from drift driving to street/touring. The motor and radio equipment can be moved to optimize the weight balance for smooth drifting or high grip cornering. Complete instructions are included in the box for owners looking for a change of pace in driving styles. 

Features...looks...performance...price: the RTR E10 Drift is one of the easiest ways ever to experience the fun and excitement of driving an RC drift car!









DAI YOSHIHARA
Dai Yoshihara is the 2011 Formula Drift Championship winner and the 2011 tires.com Triple Crown Winner. Dai clinched the 2011 Formula Drift Championship in the excitement-filled last round of the season at the 'House of Drift' - Irwindale Speedway. With more than 11 years of drifting experience, Dai is the senior member of the falken Tire Factory Team. His full-scale ride is the venerable V8-powered Discount Tire/Falken Tire Nissan S13 which has taken him to many race wins and podiums throughout his career!


ALL INFOMATION FROM www.hpiracing.com




Rabu, 24 Oktober 2012